4 System Debugging
4.1 Establishing the Configuration Environment
The user name and password are
admin
and
firewall
respectively.
Establishing the Configuration Environment
Connect the PC to the console port of the device through the Console cable.
Connecting the Console Cable
1)
Connect one end of the DB-9 serial connector of the console cable to the serial port of the PC.
2)
Connect one end of the Console cable to the Console port of the device.
Setting Terminal Parameters
Start the PC and run the terminal simulation program on the PC, such as Terminal on Windows 3.1 or HyperTerminal
on Windows 95/98/NT/2000/XP.
Set terminal parameters. The parameters are as follows: baud rate 9600, data bit 8, parity check none, stop bit 1,
and flow control as none. Details are as follows:
1)
Choose
Start > Programs > Accessories > Communications > Hyperterminal
. The hyperterminal window
appears.
2)
Click
Cancel
. A window appears as shown in Figure 4-1.
Figure 4-1
3)
In the Connectivity Note window, type the name of the new connection and click
OK
. A window appears as shown in
Figure 4-2. In the Connect Using field, select the serial port you want to use.
Figure 4-2
