4)
After selecting the serial port, click
OK
. The Serial Port Parameter Setting window is displayed, as shown in Figure
4-3. Set the baud rate to 9600, data bit to 8, parity check to none, stop bit to 1, and no flow control.
Figure 4-3
5)
After setting the serial port parameters, click
OK
.
Now many PCs do not have Console ports and systems do not support hyperterminals. Therefore, Console-to-USB
cables and terminal emulators (e.g., SecureCRT) are needed.
Parameter Settings
Step 1. Connect both ends of the Console-to-USB cable to the Console port of the device and the USB port of the PC
properly.
Step 2. Right click
My Computer
and click
Management
. Choose
Device Manager
>
Port (COM and LPT)
,
and the
COM port number will be displayed.
