V1
1. Remove all stakes and
tie-downs. Fold blind in half
laying it flat on the ground.
2. Roll BOTTOM AWAY from the
body towards the ground.
3. Continue to roll BOTTOM SECTION until it almost touches the
top of the BLIND, forming a “U” shape.
4. Once "U" shape is formed,
remove one hand and rotate it
inward 180 degrees (Right hand
counterclockwise or left hand
clockwise).
TAKE-DOWN INSTRUCTIONS
TIP: Be sure to remove all native brush, dirt, and debris BEFORE beginning the take down.
Remove ground stakes.
5. Continue to ROLL BOTTOM
over until it nearly touches TOP
of BLIND.
6. Now un-rotate your hand 180
degrees back in the opposite
direction. This will bring the
bottom portion of the blind
toward you.
7. Be sure to overlap the TWO steel bands closest to your
legs and the blind should collapse with ease.
Insert blind into its carrying case. Pack ground stakes, and high wind
tie-downs in pouches provided.
THINK SAFETY
• NEVER ALLOW CHILDREN TO PLAY WITH THIS PRODUCT WITHOUT ADULT SUPERVISION
• NEVER USE A HEATER IN YOUR RUKKET HUNTING BLIND - UNVENTED FUMES COULD CAUSE SICKNESS OR DEATH.
• UV (ULTRAVIOLET LIGHT) WARNING:
Ultraviolet light breaks down the lightweight fabric fibers (and almost any synthetic material). The material will fade (discolor), lose strength and
eventually disintegrate if left in prolonged sunlight. To extend the life of your Rukket Hunting Blind, avoid leaving it out in direct sunlight. Set up your
blind in a shady spot whenever possible.
PAGE 2
Rotate 180
Rotate back 180
