Copyright ©2022 Ruko All Rights Reserved.
48
Question
Reason
Solutions
The Transmitter
signal is interfered or
the Aircraft exceeds
the range of remote
control
The drone was placed
on an unlevel surface
such as grass and
sand and so on
The drone was placed
on the surface which
transfer samll
vibration, such as
hollow wooden floor,
desk and so on
Please fly the Aircraft
outdoors without interfer-
ence, and ensure that it is
within a controllable range
Please manually land the
drone in time and calibrate
the compass. Please make
sure to fly away from the
buildings, trees, power lines,
and signal towers
Place the drone on landing
pad or cardboard horizontally,
and ensure a gap between
the camera and the surface
Place the drone on a solid
level ground
Never touch the camera when
the power is on, place the
drone on a level ground until
the gimbal complete
self-check
After complete the compass
calibration, place the drone
on a level ground
Compass interfer-
ence
Out of control,
spinning around on its
own, abnormal sound
The camera is
tilted/Gimbal is not
working/ Can't adjust
the camera angle
Replace the propellers with
new ones
The propellers
become deformed
and incomplete
Keep touching the
camera and gimbal
or holding the drone
before all set
The compass is in
calibrating
