Runbo – KN95 Non-Medical/Non-Surgical Mask – Re-Print of instructions included in each package
Page 2 of 2
Fitting Instruction:
1. Place finger inside the particle filtering half mask. Bend the nose clip around
fingers to form nose shape.
2. Hold the particle filtering half mask in position over the nose and mouth, pull the
head harness behind the ears.
3. Use both hands, form the nose clip around the nose and shift the head harness to
ensure a positive face seal.
4. Seal check.
a. To test the fit of the particle half mask without an exhalation valve, cup both
hands over particle filtering half mask and inhale sharply.
b. If air flow is felt in the nose area, re-adjust and tighten the nose clip.
c. If air flow is felt around the edge of the respirator, adjust the particle half
particle filtering half mask/head harness to achieve a better fit.
5. Change the particle filtering half mask immediately if breathing becomes difficult
or particle filtering half mask becomes damaged or distorted.
6. Change the particle filtering half mask if proper face seal cannot be achieved.
7. Carefully observe these instructions in an important step in safe respirator use.
