51
will be deactivated. The operation duration of the accumulator is of 8 hours
when using the GPS, and in time mode of approx. 1 year.
To avoid corrosion, we recommend you to dry well the contact points of the
GPS watch, before starting a charging process.
To
charge the accumulator
, proceed as follows:
Fix the clip of USB cable on the GPS watch according to the following image
and insert the USB cable in a USB connected to power from your computer.
The installation of a driver for charging the accumulator is not necessary.
During the charging process the following symbol appears on the screen:
The charging of an empty accumulator takes approximately 2 hours.
When the accumulator is fully charged, the display "battery full" appears.