Page of 34
Runzel FOR-900 Utmärkt
Runzel FOR-900 Utmärkt
11
Steam generator with professional iron for home use.
Dear Customer! We thank you for purchasing the electric
kettle from Runzel. We hope, you are satisfied with the
high quality,
functionality and original design of our products.
General Manager
Jacob Melanie
RLC Grupp
USEFUL ADVICE
• The original appearance and softness of velvet, wool or similar
materials as well as glove and bags etc. can be restored by
holding the iron a few cm above the fabric whilst pressing the
steam button (2).
• Carpets or rugs can be restored to new, eliminating marks left
by furniture resting on them, by penetrating the flattened area
with steam and then brushing lightly.
• Never rest or use the iron on zips, hooks, rings etc. as this
could scratch the plate.
• The surface of the plate must be kept clean. To clean, wipe the
cold surface with a damp cloth.
• Never treat the iron with decalcifiers.
• After use, always wait for the iron to cool before putting it
away. keeping attention not to let the cables touch the hot
parts of the appliance. If the appliance is not used for a long
time (some weeks) it is suggested, before ironing, to press the
steam supply button for 30 seconds putting the iron on a cloth;
this to clean the internal tubes of the appliance.
• Store the iron in a dry place.
• After ironing, water left in the boiler need not be emptied.
• Divide garments according to the required ironing temperature,
starting with those which require the coolest temperature.
• Silk can be dry ironed on the wrong side.
• Wool, cotton and fine linen fabrics can be steam ironed on the
wrong side or alternatively on the right side with a thin layer
of material between the fabric to be ironed and the iron to
avoid “shine”. Starched fabrics require a higher humidity. Iron
white and light fabrics on the right side and dark colours on
the wrong side. Iron embroidery on the wrong side to make it
stand out.
• Linen can be steam ironed, steaming abundantly and ironing
dark fabrics only on the wrong side to avoid “shine”. Iron lapels,
cuffs and turn-ups on the right side to make them stand out.
• Each time you use the iron (and when you use it for the first
time) or if you have not used steam for several minutes, push
the steam button (2) repeatedly. This eliminates cold water
from the steam circuit.
IMPORTANT
• Read this instruction manual thoroughly before using the iron.
This will ensure optimum results and maximum safety.Keep
this booklet in a safe place for future reference.
