11
automatically calculates the minimum flow
3.2.2.4 Maximum flow
According to the calibrated speed, maximum speed and calibrated flow, the system automatically
calculates the maximum flow.
3.2.2.5 Calibration ratio
Calibration ratio = calibrated flow / calibrated speed. Calibration ratio unit: ml / r. This is a
reference unit for calculation.
3.2.3 Setting Mode
Parameters such as maximum speed, one key full speed, backlight time, contrast, current code
and foot switch working mode can be set on the editing interface.
3.2.3.1 Maximum speed
It is the upper limit of motor speed. The maximum speed of the pump is generally related to the
pump head model / pump tube model, which generally does not need to be changed. If the maximum
speed is changed, it is necessary to recalibrate and input the calibrated value correctly.
3.2.3.2 Full speed
That is the speed of the motor when the motor is on the standby interface and press the "full
speed" key. This function is generally used for emptying / filling. In order to ensure the stable running
of the pump, the full speed is generally lower than the maximum speed.
3.2.3.3 Backlight time
This is the retention time after the backlight is turned on, in second (SEC). Each time you press the
new key, the backlight retention time is recalculated.
3.2.3.4 Contrast
Contrast is used to adjust the brightness of the LCD screen.
3.2.3.5 Current code
The current code is used to set the maximum current of the motor.
