22
Figure 6-2-4
SN15-3 rollers (LM60A) flow-speed curve
(5) SN15-6 rollers (LM60A) flow-speed curve
Figure 6-2-5
SN15-6 rollers (LM60A) flow-speed curve
(6) SN25-3 rollers (LM60A) flow-speed curve
Figure 6-2-6
SN25-3 rollers (LM60A) flow-speed curve
Note 1:
The above "Flow-Speed" of different pump heads and different tubes is the actual test
curve, without any modification, for reference only;
Note 2:
The above test liquid is water and the test temperature is 25 ℃
Note 3:
There are many factors affecting the actual test data, such as the material and elasticity of
the tube, the tightness of the tube installation, and the viscosity of the test liquid;
Note 4:
The diameter and wall thickness of the pipe will affect the maximum speed that the motor
can reach when the pump head runs stably;
Note 5:
If high precision of dosing accuracy is required, please choose syringe pump or other
high-precision products
