www.victorruoshui.co.kr
24
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
2. Connect the test lead to the tested capacitor in parallel,
the tested capacitor value will
be displayed on LCD.
3. If “OL” is displayed on LCD, it
indicates the test capacitor
value has exceeded the
present range limit or the
capacitor is short-circuit,please
select the higher range to
complete the measurement.
4. Read the present test result from
LCD.
Note:
a)
When measuring the in-circuit capacitor, make sure
all the power of the tested circuit has been turned
off and all capacitors are fully discharged.
(Note: no Bar Graph display at this range)
b) It requires longer testing time when measuring the
large capacitor, it takes about 15 seconds at Range
100uF.
c)
Cut the connection between the test lead and tested
circuit at once after measurement.
Range
Accuracy
Resolution
40nF
±(5.0%+30d)
10pF
400nF
±(3.5%+8d)
100pF
4μF
1nF
