www.victorruoshui.co.kr
3
이 자료는 저작권법에 따라 보호받는 저작물이므로 무단배포 및 무단복제를 금하며, 내용의 전부
또는 일부를 이용하려면, 반드시 한국 VictorRuoshui 社 의 서면동의를 받아야 합니다.
type and same electric specification test lead.
4. Do not replace the inside fuse by the unconfirmed
one. Only replace it by the same type and
specification fuse. Before replacement, should keep
the test lead off the tested point to make sure there is
no any signal at the input terminal.
5. Do not replace the inside battery by the unconfirmed
one. Only replace it by the same type and electric
specification battery. Before replacement, should
keep the test lead off the tested point to make sure
there is no any signal at the input terminal.
6. When measuring electricity, do not connect the body
with the ground directly, and do not touch the
possible exposed metal terminal, output socket or
lead clamp with ground potential. Usually use the
dry cloth, rubber overshoes, rubber cushion and
other insulated materials to keep the body isolated
with the ground.
7. Do not store and use the instrument in high humility,
high temperature, combustible, explosive and strong
