8
TYPE
PROTECTION CLASS
OPERATING VOLTAGE
ABSORBED CURRENT
ABSORBED POWER
ELECTRONIC OVERLOAD PROTECTION
ELECTRONIC SPEED CONTROL
ROTATION RPM
ORBITAL DIAMETER mm
VELCROED DRILLED RUBBER PLATE
DRILLED RUBBER PLATE
PLATE DIMENSIONS mm
EXTRACTION SYSTEM
WEIGHT Kg
TECHNICAL DATA
ENGLISH
SL42AE
II
230 V - 50 Hz
2,7 A
550 W
YES
YES
3.000÷7.000
4,8
NO
YES
400 x 70
YES
2,6
SL42AEV
II
230 V - 50 Hz
2,7 A
550 W
YES
YES
3.000÷7.000
4,8
YES
NO
400 x 70
YES
2,6
8
SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS
The safety and accident prevention instructions are reported in the
“SAFETY INSTRUCTION” booklet which forms an integral part of
these documents; the operating instructions indicate the additional
information required specifically for use of the tool.
Never use the tools without the safety guards.
Any operations carried out on the tool must be effected with the power
supply disconnected.
Before starting the tool, ensure that it is held tightly and not in contact
with the work surface.
Wear clothing suited to the work you are about to perform.
The electric tool must be connect to a suitable dust extraction unit
(not supplied): use regulation safety devices for personal protection
and observe safety norms valid for the processed work material.
Due to risks that may arise during sanding, we recommend the con-
stant use of P.S.D. (personal safety devices such as gloves, headpho-
nes, goggles, face masks, etc.) according to laws in force to prevent
or reduce accident probability.
Warning!
the appliance continues to work for a few seconds after it
has been switched off!
CORRECT USAGE
The sanders are designed for sanding wood, plastic, composite
materials, paint/varnish, filling material and similar materials.
Metal and materials with an asbestos content must not be processed
with these tools.
The machine must not be operated in humid environments or in the
presence of flammable gas or liquids.
Make sure the work piece is sufficiently fastened.
In the event of improper use, the user is fully liable for any damages or
accidents.
GENERAL WARNINGS
The tool must be connected to a suitable dust extraction system (not supplied).
Summary of Contents for SL42AE
Page 32: ......
