32
Saving a configuration to a device will overwrite the existing configuration in the device without
any confirmation.
Essential Settings
Only the settings that are essential to use the device are described in this document. For a detailed
description of all the additional functionalities, please refer to the
and
Server Settings
Open the
Connection
settings section. Enter the IP address and port of your fleet management platform
server. If you are using TrustTrack, you do not need to enter anything as the server settings are already
entered.
IP/Domain
name
The IP address of the server. You may enter a numerical address or a domain name.
Default value: 92.62.134.34 (TrustTrack server)
Port
The port of the server.
Default value: 9015 (TrustTrack server, TCP protocol)
Protocol
The connection protocol. Possible values:
·
UDP
– uses less data but is less reliable. UDP does not check for lost packets or
their order.
·
TCP
– uses more data but is more reliable. TCP checks that all packets are
received and if needed, resends the missing ones and reorders them.
Default value:
TCP
UDP and TCP protocols may have different ports. Make sure you select the correct protocol and
enter the correct ports.
