EN
5
* Watch out for the danger of electric shock.
* Do not allow children and people around you to be present in the work area.
* Persons with reduced physical, motor or sensory abilities may use this machine only
under the supervision of a qualified person.
* Provide safe storage of the mill with hammers. The mill must be stored in dry spaces
with an ambient air temperature above 0
° C
and away from children's access.
* Keep the POWER CORD IN PERFECT CONDITION.
* Do not carry the mill held by the power cord, do not pull the power cord from the socket
to disconnect it.
* Do not allow the power cord to come into contact with hot surfaces, oils and sharp
surfaces.
* Use extension cord, checked in advance.
* When the mill is used outdoors, use only extension cords for outdoor use, marked in
this way.
* Secure the plug, use fasteners to secure the mill.
* While working with the mill, keep a stable position and do not try to reach objects that
are not accessible.
* Hold the mill in the position corresponding to the fixing screws.
* Keep the mill clean and indoors.
* Follow the instructions for maintenance and change of parts.
* Regularly check the condition of the socket and cable power supply. If change is
required go to an authorized Ruris service point.
* Always disconnect the mill from the voltage source.
Summary of Contents for GOSPODAR A1
