EN
22
⚫
When removing the knife for sharpening or changing, protect your hands with a pair
of thick gloves when holding the knife.
⚫
Remove the HEX HD screw and the flat washer that holds the knife.
ATTENTION:
Periodically inspect the knife adapter for cracks, especially if
you hit a hard object. Replace it when needed.
When sharpening the knife, follow the original angle of the edge as a reference point. It
is extremely important that each part of the knife is sharpened equally to prevent knife
imbalance. The unbalanced knife will cause excessive vibration when the engine enters
speed. Before reinstalling the knife and knife adapter, lubricate the engine shaft with oil.
Make sure you have installed the face knife marked with the number down when the
machine is in the operating position.
⚫
Insert the knife adapter into the engine shaft.
⚫
Place the knife in the adapter. Make sure it is aligned and placed on the adapter.
⚫
Place the flat washer on the knife.
⚫
Replace the Hex HD screw
NOTE:
To make sure the machine is working properly, the knife screw must be inspected
periodicallytightening).
Engine stop lever
Lubrication points
Engine
Wheel
Drowned screw
Flat washer
Grower washer
Butterfly nut
Summary of Contents for RX 400S
