EN
22
●
Enteryou are the adapter of the knife in the motor shaft.
●
Place the knife in the adapter. Make sure it is aligned and placed on the adapter.
●
Place the flat washer on the knife.
●
Replace the Hex HD screw
NOTE:
To make sure the machine is working properly, the knife screw must be inspected
periodicallytightening).
Emergency
stop handle :
Lubricate the
pivot points of
the
stop
handle at least
once a season with oil
Wheels:
Lubricate the wheels at least once a season with oil (engine oil). If the wheels
are removed for any reason, lubricate the surface of the rear axle and the inner surface
of the oil wheel .
The first 5 hours
change oil
Every 5 hours
check oil level
clean the residues from use
check air filter
clean the exhaust pipe
Every 25 hours / 6 months
change the oil
check the spark plug
Engine stop lever
Lubrication points
Engine
Wheel
Summary of Contents for RX300S
