EN
10
4. TECHNICAL DATA
Electrical voltage
230-240V / 50Hz
Power
500W
Rotation speed
14000 rpm
Cutting radius
300 mm
Diameter
1.2 mm
Length of the cutting
wire
6 m
Weight
1.2 kg
5COMMISSIONING.
Before first use, remove the tape covering the cutting wire.
▪
When working with the trimmer for the first time, familiarize yourself with the operating
and handling instructions of the machine with the engine off.
▪
Attach an extension cord to the trimmer. Do this: insert the extension cord through the
tensioning sleeve (7) on the handle and connect both sockets. Use only approved
extensions when working outside. If you use a cable drum, open the extension cord
completely to avoid heating it. Cross section of the wire, minimum 1.5 mm
2.
▪
Make sure you have a stable position and always wear protective and protective glasses
for your ears.
▪
Remove grass debris from the self-cut and guards.
▪
Pressing the on / off switch (1) on the handle starts the machine.
▪
Release the button (1) from the handle and turn off the machine.
▪
Always turn on the machine before contact with the grass.
▪
Hold the machine straight and swing it lightly and constantly from side to side (F).