EN
12
Insert the drum all the way into the box and pull both ends of the wire through the hole
(10). Place the wire drum (10 and 12) on the spring (12). Hold the lower serrated side
firmly; push until it locks on the serrated side and turn the drum to the right.
6. MAINTENANCE AND STORAGE
Clean the machine after each use with a brush or dry cloth after disconnecting the
machine from the power source.
Do not use water under pressure.
When not in use, store the machine in a place inaccessible to children.
Electric trimmers should only be repaired by authorized persons.
Use only the accessories and parts recommended by the manufacturer.
Store the machine in a covered and dry place, away from heat sources and out of the
reach of children.
If the power cord is damaged, it must be replaced by the manufacturer, its service or by
qualified persons in the field to avoid any danger