background image

5

coffee later

If you want to use the timer to make coffee later:

set the time now:

16 Press the hour and min buttons to set the display to the correct time – keep the 

buttons pressed to “fast forward” the display.

 

AM

 will show at the top, or 

PM

 at the bottom, of the display.

set the brewing time:

17  Press the 

T

 button and keep it pressed in

 

TIMER

 will show at the bottom of the display.

18 Press the hour and min buttons to set the display to the time you want the coffee to 

be ready – keep the buttons pressed to “fast forward” the display.

 

AM

 will show at the top, or 

PM

 at the bottom, of the display.

19  Release the 

T

 button

20 Press the 

[

 button once

 

AUTO

 will show on the display, and the light will glow red.

leave it alone

21 That’s it – leave it alone till the preset time comes round, and it makes your coffee – 

don’t fiddle with it, you might upset it

22 At the time you set, the light will change from red to green, and the coffee maker 

will start up.

remember

23 If you forget what time you’ve set it to, pressing the timer button will change the 

display to show you the time you’ve set it to.

24 Remember to press the 

[

 button after you’ve set the time, to bring AUTO up on the 

display, or the timer won’t start working.

a quick cup

If you want a quick cup of coffee before the brewing cycle has finished:

25 Remove the carafe, pour, then replace the carafe on the hotplate
26 As you remove the carafe, the non-drip valve will close automatically, to stop coffee 

dripping on to the hotplate.

27 To prevent the filter holder overflowing, replace the carafe within 30 seconds – this 

may not sound much, but you’ll find it’s more than enough time to pour a couple of 
cups of coffee.

28 When you replace the carafe, the non-drip valve will open again.

hotplate

29 The hotplate will keep the coffee hot for two hours – the light will stay at green to 

remind you it’s still on. After two hours, it’ll turn all heating off.

30 When the carafe is empty, switch the coffee maker off and unplug it from the power 

socket.

31 Let the coffee maker and the carafe cool down fully before cleaning or for about 10 

minutes before refilling.

Summary of Contents for 12591









Reviews: