Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
A
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been supervised/instructed and
understand the hazards involved.
•
Children shall not play with the appliance.
•
Children must not use the appliance.
•
Keep the appliance and cable out of reach of children.
&
To avoid injury, take care handling the blades, emptying the bowl,
and cleaning.
$
Take care when adding hot liquid, as it may be ejected due to
sudden steaming.
2 Misuse of the appliance may cause injury.
3 Unplug the appliance before assembly, disassembly, or cleaning.
4 Unplug the appliance before fitting or removing attachments.
5 Don’t leave the appliance unattended while plugged in.
6 If the cable is damaged, return the appliance, to avoid hazard.
H
Don’t put the motor unit in liquid.
7 Switch off (0) before fitting the jug to the motor unit.
8 Switch off (0) and wait till the blades come to a stop before opening the lid.
9 Don’t use the processor unless the lid is in place.
10 Don’t put your hand into the jug, even when cleaning.
11 Don’t put any other object (spoon, spatula, etc.) into the jug while the processor is plugged
in.
12 Don’t let the jug overflow. If liquid gets under the motor unit, it may be sucked into the motor,
damaging it.
13 Don’t use the appliance for any purpose other than those described in these instructions.
14 Don’t use the appliance if it’s damaged or malfunctions..
household use only
O
USING THE PROCESSOR
1 Sit the motor unit on a dry, firm, level surface.
2 Fit the spindle to the top of the motor unit.
2 Align the
d
on the bottom of the jug with the
U
on the motor unit.
3 Lower the jug on to the motor unit, then turn the jug to align the
d
with the
L
.
4 Turn the lid to bring the
d
on the lid over the
U
on the jug, and lift the lid off.
O
WITH THE SUPPORT
5 Lower the support into the centre of the jug, over the spindle
6 Fit the attachment over the support, and slide it to the bottom.
7 Use the chopper for pulverizing ingredients.
3
