3
]
2 Unplug the appliance before assembly, disassembly, or cleaning.
3 Don’t leave the appliance unattended while plugged in.
4 If the cable is damaged, it must be replaced by the manufacturer,
its service agent, or someone similarly qualified, to avoid hazard.
H
Don’t immerse the appliance in liquid.
5 Switch off (0) before fitting the jug to the motor unit.
6 Switch off (0), and wait till the blades come to a stop before removing the lid from the jug, or
removing the jug from the motor unit.
7 Don’t put utensils into the jug while the appliance is plugged in.
8 Don’t use accessories or attachments other than those we supply.
9 Don’t use the appliance for any purpose other than those described in these instructions.
10 Don’t operate the appliance if it’s damaged or malfunctions.
11 Don’t run the motor continuously for more than 1½ minutes, it may overheat. After 1½
minutes switch off for at least 2 minutes, to recover.
household use only
U
BEFORE USING FOR THE FIRST TIME
Clean the appliance, to remove manufacturing dust, etc.
d
HOW IT WORKS – IN BRIEF
1 Sit the motor unit on a stable, level surface.
2 Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place.
3 Remove the lid.
4 Put the ingredients into the jug.
5 Don’t fill past the 1500ml mark.
6 Replace the lid.
C
SWITCH ON
7 Check that the speed control is set to 0.
8 Put the plug into the power socket.
C
SPEED CONTROL
9 Turn the speed control to the speed you want (1 = low, 2 = high).
10 Turn the speed control back to 0 to turn the motor off.
11 Generally, large quantities, thick mixes, and a high ratio of solids to liquids suggest longer
timings and slower speeds.
12 Smaller quantities, thinner mixes, and more liquids than solids suggest shorter timings and
higher speeds.
13 Turning the speed control anti-clockwise to
Y
will give you a short burst at high speed. In
this direction, the knob is spring-loaded. When you let go, it’ll return to 0.
N
USING THE BLENDER
14 Lower the jug on to the motor unit, then turn the jug clockwise, to lock it in place.
15 Remove the lid.
ins
tru
cti
ons
diagrams
3 speed control
4 motor unit
5 spindle
6 jug
7 handle
8 support
9 chopper
10 mixer
11 creamer
12 tab
13 lid
14 tube
15 pusher
16 disc
17 slicer
18 coarse grater
19 fine grater
20 underside
21 blade unit
22 seal
23 cap
`
dishwasher safe
Summary of Contents for 19006-56
