4
DIAGRAMS
1. lid
2. tab
3. blade unit
4. bowl
5. switch
6. groove
7. spindle
8. slot
9. motor unit
10. peg
`
Dishwasher safe
PREPARATION
1. Sit the motor unit on a stable, level surface.
2. Lower the bowl over the spindle.
3. Locate the tabs under the bowl in the slots in the base.
4. Turn the bowl clockwise to lock it in place.
5. Lower the blade unit over the spindle in the bottom of the bowl.
6. Rotate it till it drops to the floor of the bowl.
PROCESSING
•
Put the food in the bowl.
•
Don’t process hard foods – i.e. anything you can’t cut easily with
a kitchen knife.
•
Don’t chop big bits – maximum 18mm cubes.
1.
Put the lid on the bowl. Turn the lid clockwise till the triangle marking
(
d
) on the lid lines up with the peg on the motor body.
Your mini
chopper won’t work unless they are aligned
.
2.
Put the plug into the power socket.
3.
Press the switch to start the motor, release it to switch off.
DONE?
1.
Unplug the appliance.
2.
Turn the lid anti-clockwise to unlock it.
3.
Lift the lid off the bowl.
4.
Hold the plastic part of the blade unit, turn it to free it from the spindle
flanges, and lift it straight up and out of the bowl.
5.
Turn the bowl anti-clockwise to unlock it.
6.
Lift the bowl off the motor unit.
Summary of Contents for 22220
Page 2: ...2 j e k g i l m n o f...
Page 7: ...7...
