background image

Before Use:

Read these instructions before using your toaster and keep them safe for future reference. If 
you pass the toaster on to anyone else, you should also pass on the instructions. 
Remove all packaging before using the product, but keep the packaging until you are 
satisfied that the product is operating correctly.
You may find a plastic label on the outside of the product listing its features. This must be 
peeled off before use.
Before making toast for the first time, operate the toaster without bread and with the 
browning control set at the maximum setting. This will help to burn off any dust etc. which 
may have accumulated on the elements. The new elements may give off an unpleasant smell 
but this should not be a cause for alarm. Ensure the room is well ventilated while doing this.

How  to use your toaster

1.   Position your toaster on a firm, level, heat-resistant surface, clear of curtains, drapes and  
 

other combustible materials. Do not place the toaster on or near items that may become  

 

damaged even by moderate sources of heat. Keep it out of reach of children.

2.  Shorten the power cord by wrapping the excess cord around the clips underneath the  
 toaster.
3.  Plug the power cord into the electrical outlet.

Toasting

1.  Set the browning control to the degree of browning required. The control is electronic;  
 

moving the browning control after toasting has started will not change the degree of  

 browning.
2.  Place bread centrally into the toasting slots (maximum thickness of bread is 26mm)
3.  Press the bread carriage handle down fully - the handle will not lock down unless the  
 

toaster is connected to the electrical outlet.

4.  When the toasting cycle is completed, the toast will pop up.

Extra lift facility

After toasting small items (crumpets, muffins, etc) the bread carriage handle may be raised 
further to allow easier removal.

Cancel button 

If you wish to stop the toasting cycle before it is complete, press the 

 CANCEL button. 

The elements will be turned off and the toast will pop up. 

Frozen bread 

This feature takes the guesswork out of toasting frozen bread.
Leave the browning control at your desired setting, put the frozen bread into the toasting 
slots, lower the bread carriage handle and then press the   FROZEN button.
The   FROZEN light will come on and will stay on until toasting is complete. The toasting 
time will be altered automatically to give the same degree of browning you get with unfrozen 
bread.

Caution:

 You cannot use the toaster to defrost frozen bread.

4

Summary of Contents for Chamfer RHCT1









Reviews: