6
2.
Selecting Modes:
Note: Each mode has a matching preset time and temperature, please check the
section “Preset Time and Temperature”.
Press t
he “Mode” button whilst in standby mode to make a mode selection. The
display will show “-1- to -5-“. Press it again and the display will show “-1-“.
Press the
“Temp” button in standby mode. Here the display will show the preset
temperature and the corresponding red temp indicator light will turn on. Press the
“Temp” button once to increase the temperature by 5
℃
. Use the
“Temp” button to
adjust the temperature from 110
℃
to 190
℃
. When the temperature selection
reaches 190
℃
, press the
“Temp” button again and the temperature will revert back
to 110
℃
.
Press the
“Time” button whilst in standby mode and the display will show the preset
time. Here the corresponding red time indicator light will turn on. Press the
“Time”
button once to increase the time by 1min. Use the
“Time” button to adjust the time
from 1min to 99min. When the time selection reaches 99min, press the button again
and it will revert back to 1min.
Display format: NNX (N refers to min, X refers to no display). For example, 10X
implies 10 minutes.
If you hold the “Time” button in for a longer period you will
notice that the time selection will increase quickly.
Throughout the process, the digital display will show 0.5s which means the
appliance is in operation. 0.5s will flash on the display indicating that it has stopped
operation.
3.
Heating Mode
After selecting your chosen mode, press the ON/OFF button and the display will
show the current oil temperature. Here the green power light and the yellow
HEATING indicator light will turn on. The deep fryer now begins the heating
process.
During the heating process, press the
“Mode” button. Notice that there is no
change on the display or the setting. Press the
“Time” button and the display will
show the preset time. Press the
“Temp” button to show the preset temperature.
Note: the display will show the current temperature for 5s without you having to
press any button.
During this process, the green power light and the yellow heating light will continue
to glow and the display will not flash.
4.
Waiting Mode
Once the oil reaches the preset temperature then the deep fryer will
“beep” (0.3s,
stop 0.3s). The display will now show the current temperature.
