- 4 -
Installation and Switching On The Appliance
• This appliance is connecting to 220-240V and 50 Hz.
• If you need help or are unsure how to install the unit pleace the service agent or
appointel person.
• Before making the connection to the power supply,ensure that the voltage on the
name plate corresponds to the voltage of electrical system in your home.
• Insert the plug into a socket with an efficient ground connection. If the socket has no
ground contact or the plug does not match, we suggest you to call an authorised
electrician for assistance.
• The plug should be accessible after the appliance is positioned.
• Manufacturer is not responsible for failure to complete the
ground connection as described in this booklet.
• Do not place the appliance in direct sunlight.
• Do not use in open air and shall not be exposed to rain.
• Place the appliance far from heat sources and in a well-ventilated
position. The freezer should be at least 50 cm from radiators,
gas or coal stoves and 5 cm far from electrical stoves.
• Keep the top free for at least 15 cm.
• Do not place heavy and lots of things on the appliance.
• If the appliance is installed next to another freezer, observe a
minimum distance of 2 cm to prevent condensation.
• Fit the plastic wall spacers to the condenser at the back of the
refrigerator in order to prevent leaning to the wall for good
performance.
• The appliance must be stand firmly and level on the floor Use
the two front levelling-feet to compensate for an even floor.
• The outside of the appliance and the accessories inside should
be cleaned with a solution of water and liquid soap; the inside
of the appliance with sodium bicarbonate dissolved in lukewarm
water. After drying replace all the accessories.
PDF created with pdfFactory Pro trial version
www.pdffactory.com
Summary of Contents for RH115
Page 2: ......
