10
Allow to stand for a minimum of 3 hours before plugging in to the mains
The temperature in the appliance is controlled by the temperature control dial
or thermostat located inside the fridge. Rotate the control dial up or down to
regulate the temperature inside the fridge.
On the temperature control dial, Off is the off setting, 1 is the warmest setting
and 5 is the coldest setting.
Under normal conditions for a product used in the
majority of UK homes the temperature control should be set between setting
3 and 4.
Depending on the ambient temperature of the room the appliance is situated in,
you may need to adjust the temperature control dial; in a room with a high
ambient temperature (summer) the temperature control dial may need to be
adjusted to a colder setting (moved to setting 4 or 5) or in a room with a low
ambient (winter) temperature the temperature control dial may need to be
adjusted to a warmer setting (moved to setting 2).
Setting the temperature control dial to setting 5 should be used as a rapid cool
setting and should only be set for 2 hours before a large amount of food is
placed in the fridge. The temperature control should be put back to setting 3
after the food has been placed in the fridge, if this is not done the temperature
in the fridge compartment could fall below 0
º
C as the compressor will run
continuously.
Usage
Summary of Contents for RH180FFFF55
Page 27: ...27 Notes...
