9
Allow to stand for a minimum of 3 hours before plugging in to the mains
The temperature in the appliance is controlled by the temperature control knob
located inside the fridge. Rotate the control knob up or down to regulate the
temperature inside the fridge.
On the temperature control, 1 is the warmest setting and 7 is the coldest
setting.
Under normal conditions the temperature control should be set
between 5 and 6.
Setting 7 should be used as a rapid cool/freeze setting and
should only be set 2 hours before a large amount of food is placed in the fridge.
The temperature control should be put back to setting 5 or 6 after the food has
been placed in the fridge, if this is not done the temperature in the fridge
compartment could fall below 0
º
C as the compressor will run continuously.
Once the temperature control has been set, close the door and plug in the
appliance. We recommend that the door is not opened for a minimum of 4
hours to allow the appliance to reach the standard operating temperature.
Note: The standard operating temperature for the fridge compartment should
be between 0
º
C and 4
º
C. The standard operating temperature for the freezer
compartment should be between -18
°
C and -25
°
C.
•
Note: The temperature of the freshly stored food and how often the door
is opened) affects the temperature in the refrigerator compartment. If
required, change the temperature setting.
Usage
