Door Reversal
You will need to tilt the appliance backward to access the lower hinge which holds
screws. Do not tilt more than 45 degrees and do not lay the appliance flat on its
side.
For your own safety, a minimum of 2 people should lift or tilt this product.
Tools Required: Cross headed screwdriver, flat headed screwdriver and hexagonal
spanner.
1. Remove the hinge cover and the screws from the hinge bracket, take it off and
remove the door by lifting it up and away.
2. Remove the screw cap covers that are on the top left of the unit and fix them on
to the opposite side.
3. Remove the door bushing & hole cover from the top of freezer door and fix it to
the opposite side.
Screw cap
cover
- 12 -