background image

IMpORTaNT SaFEGUaRDS

When using electrical appliances, basic safety precautions should always be followed, including:

1.  To protect against electrical hazards, do not immerse the power cord, plug or 

iron in water or any other liquid.

2.  Do not use outdoors or in damp or moist areas.

3.  Do not touch hot surfaces, always use the appliance handles.

4.  This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 

given supervision or instruction concerning use of the appliance by a person responsible for 

their safety.

5.  This appliance must be attended whilst plugged in.

6.  Ensure the iron is standing on its heel and with the soleplate clear of any surrounding objects 

when switching on.

7.  Ensure the iron is unplugged during filling and emptying.

8.   Always turn off and unplug from the wall power outlet when not in use.

9.  To avoid possible burns, ensure the appliance is off and has cooled before cleaning.

10.  To disconnect, turn off the wall power outlet, then grasp and pull the plug from the wall outlet. 

Never pull by the cord.

11.  Do not operate this appliance with a damaged cord/plug or after the appliance has been 

dropped, damaged or has malfunctioned in any manner. Contact Customer Service for 

examination, adjustment, repair or replacement.

12.  There are no user serviceable parts. If power cord is damaged, it must be replaced by the 

manufacturer or similarly qualified person in order to avoid a hazard.

13.  Do not use on an inclined or unstable surface.

14.  Keep the iron and the power cord away from the edge of tables or countertops and out of 

reach of children and infirm persons.

15.  Ensure the power cord does not present a tripping hazard.

16.  Do not place on or near any heat sources.

17.  Follow the instructions when cleaning this appliance.

18.  Do not use this appliance for other than its intended purpose.

19.  Do not leave the iron unattended when switched on or where it may be touched by children or 

infirm persons while it is still hot.

20.  This appliance is not a toy. Children should be supervised to ensure they do not play with the 

appliance.

21.  This appliance is not intended to be operated by means of an external timer or separate 

remote control system.

22.  For added safety, electrical appliances should be connected to a power outlet that is 

protected by a residual current device (RCD), also often referred to as a ‘Safety Switch’. Your 

switchboard may already incorporate an RCD. If unsure, call an electrician for verification and 

fitting if necessary.

SaVE THESE INSTRUcTIONS. THIS appLIaNcE IS FOR HOUSEHOLD USE ONLY.

MAX

TEMPERATURE

CONTROL DIAL

STEAM CONTROL

Summary of Contents for RHC909













Reviews: