VERTIcaL STEaMING
Vertical steaming removes wrinkles from hanging clothes, hanging curtains, and
furnishing fabrics.
•
Check that there is water in the tank.
•
Turn the temperature control dial to ‘
max
’.
•
Wait until the green Temperature Ready light illuminates.
•
Check that there is nothing behind the fabric that may
be damaged by the steam or heat.
•
Check that pockets, turn-ups, and cuffs are empty.
•
Hold the iron, with the soleplate vertical, close to (but
not touching) the fabric.
•
Press the
burst of steam
button. You may have to
press it 2 or 3 times to pump water through the
system.
•
Leave 3 seconds between bursts, to allow the
temperature to recover.
aFTER USE
•
Turn the temperature control dial to ‘
minimum
’, move the steam control to
no
steam
.
•
Unplug the iron.
•
Lift the top of the water inlet cover to open it.
•
Hold the iron over a sink, turn it upside down, and drain the water from the tank.
CAUTION: The water may be hot.
•
Sit the iron on its heel.
•
Leave it to cool down completely.
•
When it is cold, wipe off any moisture, and close the
water inlet cover.
•
Store the iron on its heel, to avoid corrosion and
damage to the soleplate.
MAX
TEMPERATURE
CONTROL DIAL
STEAM CONTROL
MAX
TEMPERATURE
CONTROL DIAL
STEAM CONTROL
