10
Allow to stand for a minimum of 3 hours before plugging in to the mains
The temperature in the appliance is controlled by the temperature control knob
located on the front face, at the bottom right hand side. Rotate the control knob
left or right to regulate the temperature inside the freezer.
On the temperature control, 1 is the warmest setting and 9 is the coldest
setting.
Under normal conditions the temperature control should be set at 6.
Setting 9 is a super freeze setting where the compressor will run continuously
and should only be set 2 hours before a large amount of food is placed in the
freezer. The temperature control should be put back to setting 6 after the food
has been placed in the freezer, if this is not done the appliance will remain in the
super freezer setting and the compressor will run continuously. Once the
temperature control has been set, close the door and plug in the appliance. We
recommend that the door is not opened for a minimum of 4 hours to allow the
appliance to reach the standard operating temperature.
Note: The standard operating temperature for the freezer compartment should
be between -18
°
C and -30
°
C.
Indicator lights
Power
Indicates the freezer is switched on.
Run
Indicates the appliance is working. (The red indicator light will
switch on and off as required, this is normal)
Usage