background image

Please read these instructions carefully and keep for future reference.  

In order to prevent the risks of a fire, an electrical shock, burns and other injuries, it is 
imperative to observe basic safety measures when using electrical appliances.

 

 
Please  read  the  following  information  carefully  before  using  the  appliance  for 
the first time for your own safety and to ensure correct use. 

 

IMPORTANT NOTES 

 

1. 

The specified voltage must match the mains voltage. Use an adequate wire cross-section.  

2. 

The appliance air inlet and outlet openings must not be obstructed in any way!  

3. 

Never move the heater during operating, always unplug heater when not in use.  

4. 

Never use the appliance if the appliance or cord is damaged. The appliance may only 

be opened up and repaired by authorized qualified personnel.

 

 

 

 

SAFETY INSTRUCTIONS 

 

When using any electrically powered product, basic safety precautions should always 
be followed, including the following: 

 

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT. 

 

WARNING

 

to reduce the risk of fire, electrical shock or injury to persons or property: 

 

1.

 

Always operate the product from a power source of the same voltage, frequency and rating 
as indicated on the product identification plate. 

2.

 

Remove the unit from its packaging and check to make sure it is in good condition before 
using. 

3.

 

Do not let children play with parts of the packing ( such as plastic bags) 

4.

 

Close supervision is necessary when the product is used by or near children or infirm 
persons. Do not allow children to use it as a toy. 

5.

 

Do not operate any product with a damaged cord or plug, or after the product malfunctions, 

or is dropped or appears damaged in any way. Return the complete product to the place of 
purchase for inspection, repair or replacement. 

6.

 

Before unplugging the power cord, be sure to turn the power off. When touching the unit, 
be sure your hands are dry to prevent electrical shock. 

8.

 

Ensure the cord is fully extended before use and arrange it so that it is not in contact with 
any part of the heater. 

9.

 

In use, some parts of the heater are hot. When moving, hold the heater only by the handle 

provided. 

10.

 

Do not use the heater in areas such as garages where petrol, paint or other flammable 
substances are used or stored. 

11.

 

Do not use near or point the heater to furniture, animals, curtains or other inflammable 
objects. Keep combustible materials such as furniture, bedding and any other combustible 
materials at least 1 metre from the front and sides, and from the rear of the heater. 

12.

 

Do not place the cord under carpet or cover with throw rugs or furniture. Arrange the cord 

so that it cannot be tripped over. 

13.

 

Do not place the heater on bedding or on thick and long pile carpet where the openings 
may be blocked. 

 

14.

 

To reduce the risk of electric shock, do not immerse or expose the product or flexible cord 
to rain, moisture or any liquid other than those necessary for correct operation of the 

product. 

Summary of Contents for RHCTH1








Reviews: