15.
This product should not be used in the immediate vicinity of water, such as bathtub,
washbowls, bathroom swimming pool etc. where the likelihood of immersion or splashing
could occur.
16.
Switch off and unplug from outlet when not in use, before assembling or disassembling
parts and before cleaning. Remove by grasping the plug - do not pull on the cord.
17.
A common cause of overheating is deposits of dust and fluff entering the heater. Ensure
these deposits are removed regularly by unplugging the heater, allowing it to cool and
cleaning as described in the Care, Cleaning and Storage section.
18.
Be sure that no other high current appliances are plugged into the same circuit with your
heater as an overload can occur.
19.
Avoid the use of an extension cord as the extension cord may overheat and cause a risk of
fire.
20.
Do not use the appliance for other than its intended use.
21.
Do not use outdoors.
FOR INDOOR USE ONLY
.
22.
Do not leave the appliance unattended when switched on.
23.
Do not place objects on the product or allow objects to obstruct the inlet or outlet openings,
or operate in close proximity to walls or curtains, etc. Do not cover the unit when in
operation.
24.
Do not position the heater immediately below a socket-outlet.
25.
The use of attachments or accessories not recommended or sold by the product distributor
may cause personal or property hazards or injuries.
26.
This product is intended for normal domestic/household use only.
27.
Use this heater as described in this manual. Any other uses, not recommended by the
manufacturer, may cause fire, electric shock, or injury to persons and may void the
warranty.
LOCATION
1.
The appliance should be placed with a minimum distance of 90 cm away from flammable
objects (e.g. curtains), walls or other structures!
POWER CORD
1.
Use only an approved extension cord that is suitable for the appliance rating!
2.
Do not lay the cord under a carpet. Do not lay rugs, mats or similar articles on it.
Position the cord so that it does not pose an obstruction or a tripping hazard.
3.
Never pull the plug out of the socket at the cord!
4.
Always disconnect the mains plug when the appliance is not in use.
Attention! The appliance may only be used for normal domestic use and not for
industrial purpose.
BEFORE USE
1. Before use, remove all packaging and inspect the appliance for any damages. If there are
appears to be any damages, please take back to place of purchase for a replacement.
2. Ensure that all the accessories are included as per diagram above before you can continue
with the installation.
3. Ensure that the location of the heater installed is not directly under a power socket and that a
power socket is available to power the appliances for use.
