Installation
Electrical connection
•
WARNING-
THIS APPLIANCE MUST BE EARTHED
•
This appliance is designed to be connected to a 220-240V~50Hz AC electricity
supply.
•
Before proceeding with the electrical connection, verify that the current
carrying capacity of the system and the isolator / main switch is adequate for
the maximum power rating of the oven.
•
Electrical installation of the residence and of the appliance’s isolator must be
earthed and conform with the required safety regulations.
•
If there is no suitable circuit and a fused switch, they must be installed
by a qualified electrician before the hob is connected.
•
An isolator switch must be easily accessible once the oven has been installed.
•
Do not use adaptors, multiple sockets and/or extension leads.
•
A circuit breaker with a contact opening of at least 3 mm, rated 32A and
delayed functioning type must be installed inside the supply circuit.
•
During installation, please ensure that insulated cables are used. An incorrect
connection might damage your appliance and will void the manufacturer’s
guarantee.
•
All repairs must be carried out by an authorised service personal or a
qualified electrician.
•
Switch off/isolate your appliance before each maintenance.
•
The GREEN/YELLOW wire is the EARTH and must be connected to the
terminal which is marked with the letter E or by the earth symbol or
coloured GREEN or GREEN/YELLOW.
•
The BLUE wire is the NEUTRAL and must be connected to the terminal
marked with the letter N or coloured BLACK.
•
The BROWN wire is the LIVE wire and must be connected to the
terminal marked with the letter L or coloured RED.
9
