24
HOW TO USE THE MICROWAVE
2.
Once you have turned the dial to select the appropriate setting, press the
‘
Start
’ button to confirm.
3.
Turn the
‘
'
Timer/Weight/Auto Menu
’
dial to choose the food weight, these
are pre-set and listed in the above table.
4.
Press the
‘Start
’ button to commence cooking.
Make sure you monitor cooking progress as times can vary. Allow the food to
stand in the microwave for 1-2 minutes after the cooking cycle is complete.
Multi-sequence cooking function
For some recipes, results may be better if you wish to cook on different
power levels for different times, for one dish.
Note
:
This can be used to set a maximum of two different stages. The auto
menu cannot be set as one of the multi-stage cooking functions.
For example, if you wanted to
defrost 500g of food, then cook it at 80%
microwave power for 7 minutes - the steps are as follows:
1.
Press the
‘Weight/Time Defrost’
button once
–
the screen will display
‘dEF1’
2.
Turn the ‘
Timer/Weight/Auto Menu
’
dial to adjust the defrost weight to
500g.
3.
Press the power button once.
4.
Turn the ‘
Timer/Weight/Auto Menu
’
dial to choose 80% microwave power
until the display shows ‘
P80
’.
5.
Press the ‘
Start/+30Sec/Confirm’
button to confirm.
6.
Turn the ‘
Timer/Weight/Auto Menu
’
dial to adjust the cooking time to 7
minutes.
7.
Press the ‘
Start/+30Sec/Confirm’
button to start the cooking process.
Summary of Contents for RHM2063-AH
Page 38: ...38 NOTES...
Page 39: ...39 NOTES...