Locking Function
The wire shelves and baking tray can be pull out halfway until they are locked in
place. The locking function prevents the grill rack and baking try from tilting
when they are pulled out. The grill rack and baking tray must be inserted into the
cavity correctly to avoid tilting and work properly. When inserting the wire rack,
please make sure the wire rack is as shown on the illustration from on the
previous page.
Installation of the Ceramic Clips for Side Racks
The ceramic clips hold the side racks in place, these need to be fitted along with
side racks prior to first use. Note, there are 6 clips packaged in the brown box
with the other accessories. Only 4 clips are needed as 2 are spare clips (1 front &
1 rear) should they need replacing. Please follow the below installation steps
(ensure the oven, ceramic clips & side racks are cold and not hot):
1. Take note of which clips are front clips (marked with an F) and which clips are
rear clips (marked with an R). Use the front clips for holes at the front of the
oven cavity and the rear clips for the holes at the rear of the oven cavity.
2. Hold the clips at a 45 degree angle and insert the top hook of the clip into the
top of the 2 holes at the side of the oven cavity and then insert the bottom
hook of the clip into the bottom hole on the side of the oven cavity
3. Repeat for the remaining 3 clips
28
HOW TO USE YOUR OVEN
Rear
Clip
Front
Clip
Summary of Contents for RHMEO7202DS
Page 39: ...39 NOTES ...