Russell Hobbs RHMO10, Instructions & Warranty

16

4.  Press the 

Start/+30sec/Confirm

 button to commence. 

Make sure you monitor cooking progress as times can vary. Allow the food to stand in the 
microwave for 1-2 minutes after the cooking cycle is complete.

MULTI SEQUENCE COOKING FUNCTION

For some recipes, results may be better if you wish to cook on different power levels for 
different times, for one dish.

Note: This can be used to set a maximum of two different stages. The auto menu cannot 

be set as one of the multi stage cooking functions.

For example, if you wanted to defrost 500g of food, then cook it at 80% microwave power for 
7 minutes the steps are as follows:
1.  Press the 

Weight/Time Defrost

 button once the screen will display

2.  Turn the 

Timer/Weight/Auto Menu

 dial to adjust the defrost weight to 500g.

3.  Press the 

Power

 button once.

4.  Turn the 

Timer/Weight/Auto Menu 

dial to choose 80% microwave power until the 

display shows ‘ P80 ’.

5.  Press the 

Start/+30Sec/Confirm

 button to confirm.

6.  Turn the

 Timer/Weight/Auto Menu

 dial to adjust the cooking time to 7 minutes.

7.  Press the 

Start/+30Sec/Confirm

 button to start the cooking process.

PRE SET COOKING FUNCTION

You can set your microwave to start cooking at a pre set time, without the need to be present 
to input the programmes. Make sure your food is in the microwave and prepared when you 
programme the pre-set function.

You will need to set the clock and the cooking menu and time.

It is possible to input a maximum of 2 cooking stages. Do not use the defrost function in the 
pre set function. The auto menu can be set for a single stage only.

PRE SET COOKING FUNCTION EXAMPLE

If the current time is, say, 

12:30

 and you want the microwave to cook on 

80% power

 for

 7 

minutes

 at 

14:20

1.   With the colon flashing on the display screen, press the 

Power 

button

2.   Turn the 

Timer/Weight/Auto Menu

 dial to choose 80% microwave power

 P80 

is

3.   Press 

Start/+30Sec/Confirm

 button to confirm.

4.   Turn the 

Timer/Weight/Auto Menu

 dial to adjust the cooking time to 7 minutes.

5.   After the above steps, DO NOT press 

Start/+30Sec/Confirm 

button, but do as follows:

6.   Press the 

Clock/Pre Set

 button, the current time displays and the hour figures flash.

7.   Turn 

Timer/Weight/Auto Menu

 dial to adjust the hours to display 

14:.

 Press 

Clock/Pre 

Set

 button and the minute figures will flash. Turn the

 Timer/Weight/Auto Menu

 dial to 

adjust the minutes to display 

20

. This sets the start time.

8.   Press 

Start/+30Sec/Confirm

 button to finish setting.

The “:” will illuminate, the buzzer will ring twice when the set start time arrives, and 

then cooking will commence automatically. 

If you wish to cancel the pre set cooking, press the

 Stop/Clear 

button.