with the appliance.
The appliance is not intended for use by young children or infirm
persons unless they have been adequately supervised by a
responsible person to ensure they can use the appliance safely.
Check to ensure that the controller(s) and supply cord(s) cannot
become trapped in any bed or bedding. Keep the controller(s)
outside the bedding as much as possible.
Avoid extended use of your electric blanket at a high setting.
This may result in skin burns.
Inspect your blanket regularly for signs of wear or damage. If
there are signs of or if the blanket has been misused, return it to
the supplier prior to any further use.
This electric blanket is designed for domestic use only. It is not
intended for use in hospitals.
This electric blanket is not to be used by people who are
helpless, by infants, or by people who are insensitive to heat.
FITMENT
Place the electric blanket on your bed with the controller at
the pillow end ensuring it does NOT overhang the bed edge
and is not under the area intended for the pillow(s). Smooth
out the folds and wrinkles then unwind the tie tags and secure
the electric blanket to the bed as indicated. Pass the tape
under each comer of the mattress and through each loop then
under the next corner and through the loop then back to the
other side before securing firmly with a knot. A single control
blanket may be turned over so that the control is on the
preferred side of the bed however this may result in the
control facing towards the bed. Secure each corner and also
the middle as indicated.