background image

4

BEFORE USING THE TOASTER FOR THE FIRST TIME

•  Ensure all packaging, swing tags and promotional labelling has been removed from the toaster, 

and check that the toasting slots are empty before connecting to the wall power outlet.

•   Position your toaster in a well ventilated area, on a firm, level, heat-resistant surface, clear of 

curtains, drapes, overhead cupboards and other combustible materials.

•   Plug the power cord into the wall power outlet and switch on.
•   Set the browning controls to the highest setting (6).
•   Now operate the toaster by pressing down the bread carriage levers until they lock into 

place.

 

This process will cure the new elements and burn off any dust, residues, etc., which may have 
accumulated on the elements. The new elements may give off an odour and a small amount

 

of vapour whilst burning in; this is normal. The toaster will shut itself off after a few minutes. It

 

is now ready for toasting.

POSITIONING

•  Position your toaster on a firm, level, heat-resistant surface, clear of curtains, drapes, 

overhead cupboards and other combustible materials.

•   Do not place the toaster on or near items that may become damaged even by moderate 

sources of heat.

•   Shorten the power cord by wrapping the excess cord around the clips underneath the 

toaster.

TOASTING BREAD

•  Plug the power cord into the wall power outlet and switch it on.
•  Rotate the browning control(s) to the desired level (1 low setting to 6 high setting).
•  Put bread into the toasting slots and push the lever(s) down. 
 

1-2 slices: put the bread into either the left or right hand slots and press the relevant hand 
lever down. 

 

3-4 slices: Put the bread into the left and right hand slots and press both hand levers down. 

•  The Cancel light will come on and the elements will heat up. 

Note: 

Bread may burn, so always monitor the cooking process.

•  When done, the toast will pop up and the elements will switch off.

HIGH LIFT

•   After toasting smaller items (bagels, crumpets, etc.), the bread carriage lever can be lifted 

manually, so these smaller items can be easily removed from the toasting slots.

EJECTING TOAST: 'CANCEL'

•  To stop the toaster mid-cycle, press the 

Cancel

 button.

•  The toast will pop up and the elements will switch off.

FROZEN BREAD: 'DEFROST'

•  Leave the browning control at your preferred setting.
•  Place the frozen bread into the slot; lower the bread carriage lever, then press the 

Defrost

 

button.

• The 

Defrost

 light will come on, and the toasting time will be altered automatically to give the 

same degree of browning you get with unfrozen bread.

Summary of Contents for STRUCTURE RHT334 Series









Reviews: