5
BEFORE FIRST USE
CAUTION: Handle chopping blades and slice/grate disc carefully.
• Carefully remove all packaging material, any stickers and the plastic protector from the
power plug.
• As some parts may be packed separately, check to ensure all items have been unpacked
before disposing of the packaging.
• All parts need to be thoroughly cleaned before being used for the first time (see 'Care and
Maintenance').
• Remove and save instruction booklet.
• Select a level, dry countertop where the appliance is to be used, allowing air space on all
sides to provide proper ventilation for the motor (50mm gap min).
GENERAL ASSEMBLY OF THE FOOD PROCESSOR
The general assembly steps are shown in figure A and B on the following page.
1. Place the chopping bowl on to the motor unit, with the handle located on the right hand
side.
2. Fit the spindle into the middle hole of the chopping bowl.
3. Select the attachment you want to use and place it onto the spindle.
See Fig A for fitting the chopping blade and dough blade.
See Fig B for fitting the reverse slice/grate disc.
4. Place the lid onto the chopping bowl. Hold the lid with the feed chute slightly behind the
bowl handle, the arrow symbol needs to align with the unlock symbol.
5. Turn the lid clockwise to lock the tab into the top of the handle. The arrow symbol
should now align with the lock symbol .
NOTE: Ensure that the lid is properly locked in. Otherwise the unit will not operate.
6. Place the food pusher onto the feed chute.
7. The unit is now ready for use.
