5
BEFORE FIRST USE
CAUTION: Always turn off and unplug from the wall power outlet before fitting or
removing the shaft.
•
Carefully remove all contents from the packaging.
•
Take extreme care when unpacking and handling the sharp blades.
•
Dismantle and clean all parts as instructed in the “CARE AND CLEANING” section of
this instruction book.
CAUTION: Handle chopping blades carefully.
USING THE ‘SLICK STICK’ MIXER
CAUTION: Always turn off and unplug from the wall power outlet before fitting or
removing the shaft.
CAUTION: DO NOT handle by the blade. The blades are very sharp. Use caution when
handling and storing.
•
Connect the shaft to the motor unit by aligning the arrow symbol
on the motor unit
with the unlocked symbol on the shaft. Twist so that the locked symbol and the arrow
symbol
are aligned, and the shaft and the motor unit are tightly fitted together.
•
Insert the plug into a wall power outlet and switch the outlet on.
NOTE: To avoid splashing, immerse the shaft end into the ingredients before operating
the mixer.
•
Holding the ‘Slick Stick’ mixer with a firm grip, press and hold the ON button to start the
motor.
•
Make a rotating, up and down motion to obtain even processing of the ingredients.
•
Release the ON button to stop the motor.
•
After use, switch off the wall power outlet and remove the plug from the socket.
•
To disengage the shaft from the motor unit, twist the shaft so that the arrow symbol on
the motor unit aligns with the unlocked symbol on the shaft.
•
Always switch off and disconnect the appliance from the wall power outlet when not in
use.
CAUTION: For your safety, we recommend you do not process liquids/foods that are
hotter than 40°C.
