Remove all packaging material. Check the product has not been damaged in transit before using it for the first time. Pay
particular attention to ensuring that the wheels and wheel suspension, screw and plastic connections and brake cables
are intact The rollator is delivered pre-assembled. Before using for the first time, check that the brakes work properly; they
may need to be readjusted. The hand grips must be adjusted to the appropriate height for the user. Please dispose of the
packaging material correctly.
Assembly
1.
Position the rollator in front of you and press the seat
downwards until the folding catch engages (pic. 1). If
the brake levers are locked into position release these
first. Guide the handlebars with the handles into the
frame tube (pic. 2). At the same time make sure that
the brake cables are not twisted.
2.
Adjust the handles to the right height for the user. They
can be adjusted by sliding the handlebars in and out.
When the user is standing upright the handles should
be adjusted to the height of their wrists.
3.
In order to fix the handles in place insert the locking
screw through the frame tube from the inside outwards.
The screw head fits into the opening on the frame.
Place the washer onto it and tighten the star screw (pic.
3 + 4).
4.
You can insert the back rest into the sockets in the tube
on the front of the rollator. You can fix it with the
enclosed clips (pic. 5–8).
Parts:
1.
brake lever
2.
Security screw
3.
Tray
4.
cane holder
5.
brake pad
6.
back wheel with braking device
7.
handlebars
8.
backrest
9.
clips
10.
seat
11.
basket
12.
front wheel steerable
Included
Rollator, backrest, tray, basket, cane holder
10.
9.
8.
7.
1.
2.
5.
6.
3.
4.
11.
12.
pic. 1
pic. 3
pic. 2
pic. 4
pic. 5
pic. 6
pic. 7
