DMS-3.1 Test Procedure
35
of
64
Initial Test Setup
Note: After loading firmware always cycle power on the DMS-3.1 before testing.
1. Connect the MCA-C5, DMS-3.1, and a 4 Port Router as shown in the picture.
2. Follow the diagram in the picture ensuring that
DMS-3.1 Stream 1 is connected to MCA-C5 Source 2
DMS-3.1 Stream 2 is connected to MCA-C5 Source 3
DMS-3.1 Stream 3 is connected to MCA-C5 Source 4
DMS-3.1 Tuner is connected to MCA-C5 Source 5
3. Connect an AM and FM antenna to the DMS-3.1 antenna connectors.
4. Connect the DMS-3.1 12VDC Trigger Input to the MCA-C5 12VDC Trigger Output 1
using a cable with 3.5mm mono jack on each end.
5. Connect an MDK-C5 Keypad to the MCA-C5 Keypad Port 1
using an RJ45 Patch.
DLNA
Hard Drive
(Iomega 34337
Home Media Network
Storage)
Computer
Summary of Contents for DMS-3.1
Page 1: ......
Page 27: ...SMS_USB_ _PWR_LED_Front_RevA_7_19_10 sch 1 Wed Jul 28 15 07 39 2010 ...
Page 116: ......