20
ST2 TUNER PROGRAMMING
PROGRAMMING FOR CAV6.6 USE
Memory Name
A memory preset
must
be created and saved
before it can be named. Once it is saved, the
preset’s Tuner #, Bank # and Memory # must be
entered in the following procedure.
1.
Enter the Setup Menu by pressing and holding
the TNR SEL button.
2.
MEMORY NAME appears on the tuner.
3.
Press BAND.
4.
Press the Tune Up/Down buttons to select the
Tuner #.
5.
Press BAND to advance.
6.
Press the Tune Up/Down buttons to select the
Bank #.
7.
Press BAND to advance.
8.
Press the Tune Up/Down buttons to select a
Memory #.
9.
Press BAND to advance. MEMORY NAME
appears again.
10.
Press BAND to access the Memory Name
entry screen.
(Continued on next page)
To Program the ST2 Tuner to operate with the CAV6.6:
Once the CAV6.6 procedure is completed, perform the following setup of the tuner for use with the
CAV6.6.
1.
Enter the Setup Menu by pressing and holding the TNR SEL button.
2.
Press MEM Up/Down buttons until SOURCE NUM appears on the tuner.
3.
Press BAND to advance. TUNER # appears.
4.
Press Tune Up/Down buttons to select the Tuner #.
5.
Press BAND. SOURCE NUM appears again.
6.
Press Tune Up/Down buttons to select the source # for the tuner (as determined in the CAV6.6
setup process).
7.
Press BAND. TUNER # appears again.
8.
Press Tune Up/Down buttons to select the other Tuner #.
9.
Press BAND. SOURCE NUM appears again.
10.
Press Tune Up/Down buttons to select the source # for this tuner (as determined in the CAV6.6
setup process).
11.
Press TNR SEL twice to exit the Setup Menu and return to run mode.
ST2 Tuner Setup Menu
The ST2 Tuner Setup Menu provides procedures for assigning a custom name to a memory preset or
a bank, and to choose a region for operation (US or Euro). The menu also outlines source number
assignments and factory initialization procedures, and provides system information. The Setup Menu
procedures can only be performed from the ST2 Tuner front panel. The following items make up the
Setup Menu:
Memory Name, Bank Name, Source Number, Region, Factory Initialization
and
System Info.
Summary of Contents for ST2 REV 1
Page 1: ...ST2 Smart Tuner Dual AM FM Tuner INSTRUCTION MANUAL...
Page 27: ...27 NOTES...
