ENG
ADJUSTING THE HEIGHT OF THE STEERING COLUMN
1. Open the clamp (H) and press in the release
button (G), and set the steering column to the
height you want. There are three different
heights to choose from.
2. When you have chosen the height, check that the
release button (G) pops out on the side of
the steering column.
3. Then close the clamp (H).
4. To unfold the scooter, carry out the same steps
but in reverse order.
USING THE BRAKE
• Put your foot on the back wheel’s brake (I) to stop
or slow down, or put your foot on the ground.
MAINTENANCE
• Wipe the scooter with a mild detergent after use.
• Grease the front and back wheel axles when
necessary.
• Do not leave the scooter in high temperatures,
direct sunlight or dusty environments.
• Store the scooter in a dry and dust-free location.
REPLACING WHEELS
• To replace the wheel, put one side of the wheel
against you, while screwing on the other side
with a suitable tool.
I
H
G
6
Summary of Contents for 755012450101
Page 26: ...NOTES...
Page 27: ...NOTES...
