5
BEFORE FIRST USE
• Remove the packaging.
• Check the device, power supply and cables for damages.
• Connect the device to the power supply. The device must be switched off.
• Route the cable safely so that there is no risk of anyone tripping over it.
USE
• Make sure that the device is switched off before inserting the power cable.
• Press the On Button.
• Set the desired massage speed by using the control. The Heat function can be
switched on using the “Heat” button.
• To change massage attachments, start by unplugging the device and turning it off.
Attach by rotating the attachment on the product in an anti-clockwise direction.
Fix the newly positioned massage attachment in place by rotating it in a clockwise
direction.
• Guide the device with both hands to the area of the body to be massaged. You can
stand, sit or lie down and can massage yourself or another person. The massage
intensity can be altered by pressing more or less firmly with the massage device.
Do not massage the same spot for more than 3 minutes at a time.
• Rotate areas throughout the body to avoid injury.
• The massage should be pleasant and relaxing at all times. Stop the massage or
change the position of the massage device if you find it is painful or unpleasant.
• Do not jam or force any part of your body, in particular your fingers, into the area of
the massage head.
CARE AND STORAGE
CLEANING
First unplug the device and allow it to cool off. Then you can clean it with a cloth which
is no more than lightly moistened. You can also use a mild detergent. Only clean the
appliance in the manner specified. Fluid must never be allowed to enter into the device or
accessories. Do not use the device again until it is completely dry.
STORAGE
Keep the massage device in a cool and dry place where it is out of the reach of children.
We recommend storing the device in its original packaging.
