BEFORE USING MIXER
• Remove any packages, disassemble any detachable parts.
• Clean the dough hooks and beaters.
• Before assembling the mixer, make sure the power cord is unplugged from the power
outlet and the speed selector is at the “0” position.
USING YOUR MIXER
1. Fit the beaters or dough hooks into mixer.
NOTE!
The beaters can be inserted in either socket, as the beaters are identical. For
the dough hooks, the hook with a washer can only be inserted into the bigger socket
and the other hook can only be inserted into the smaller socket. The two dough hooks
cannot be inserted in any other way.
2. Ensure that the unit is at the “0” setting, then plug in the power source.
3. Set the speed selector to your desired speed. There are 5 speed settings available.
When kneading yeast dough, use the speed selector to select the lower speed and
then the higher speed for best results. The mixer will run at the highest speed when
pressing the turbo button.
WARNING!
Do not stick knife, metal spoons, fork and so on into bowl while operating.
PRODUCT DESCRIPTION
TECHNICAL DATA
Voltage
220–240 V~50/60 Hz
Power
300 W
Dimensions
W195 x D90 x H135 mm
ENG
Ejector button
Beater
Dough hook
Dial knob rubber
Turbo button
4
