R H
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
I N S T A L L A T I O N I N S T R U C T I O N S
1. Installing Come Along Door Guide
(optional)
Door
Edge
A mortise is the channel
that runs along the bottom
of a wood Door.
Front of
Back Door
vertical Bracket edge
• Slide both doors to the open position. Slide the back door
(closest to the wall) out several inches to gain access to
the Door. This is where you will install the Guide.
• On the back Door, Pencil a line 1-1/16” parallel to the
edge of the door that is closest to your Door opening.
• With the edge of the Bracket back lined up with the line
you just penciled, shift the Bracket up slightly so the
vertical Bracket edge is inside the mortised groove,
holding the door in place, yet the mortised groove clears
the top of the Bracket edge.
• With a Phillips drill bit, drill a Grabber Screw into each
hole in the Bracket back plate.
• Slide front Door so the mortise
along the bottom of the Door
slides over the vertical Bracket edge.
2.
Door
Opening
1
1
/
16
” from
door edge
Wall
Wall
Door
Opening
Door
Edge
Front of
Back Door
Installing a Wall-Mount Door Guide as a Come Along will
allow you to open and close both Doors with one easy pull.
Back Door
Front Door
Installing Come Along
Page 11
