R H
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
I N S T A L L A T I O N I N S T R U C T I O N S
Header and Brackets
1. Drill Pilot Holes
• Using a drill with a 1/8” bit, drill a pilot
hole into the center of each of the markings
(four for each Bracket).
• Attach each Bracket with Lag Screws
and a Ratchet.
3. Attach Brackets to Header
2. Attach Header to Wall
• Align the top penciled line on your Header
(1-3/4” from the bottom of the Header)
with the penciled line on your wall.
• Use a level to ensure your Header is straight.
Attach the Header to the wall, making sure you
are drilling and attaching into wall studs
.
Page 8
9/16”
