SOFT CLOSE SYSTEM
Installation Instructions
RUSTICAHARDWARE.com
4
3
03
2017
VERSION
4. Place the soft close mounting
bracket and mechanism against the
back of the track with the soft close
mechanism facing the wall (Figure 4).
Figure 4
Figure 5
5. Reinstall the lag screws, washers and
hard stop (Figure 5).
6. Slide the door to the closed position.
SUGGESTION:
Use double stick tape to hold the tab in
place when making adjustments and
installing.
Figure 6
8. Install the tab(D) on the door
using the two phillips head screws(C)
(provided) (Figure 6).
9. Repeat steps 2 through 8 for the
opposite side of the track.
7. Align the stop tab on the top edge of
the door to interact with the soft close
mechanism (Figure 6).
